Considering making a cross cut sled for my table saw. So my question is...if you were to build one today...what features would you design into your build?
Tags:
Well, if I had the money I would have....
1. Adjustable metal bars for the miter slots.
2. Kreg tracks and klamps.
3. Adjustable stop block for repeated cuts.
4. Backstop so you can see the blade after the cut is made.
5. Nice smooth flat surface.
Take a look at this....crosscut sled.
>>>....''Backstop so you can see the blade after the cut is made.'".../em>
An exposed spinning saw blade poses a potential hazard to the operator.
The hazard exists when an operator completes the saw cut, the exposed spinning blade is nearest the operators arms. Most dangerous, when wearing clothing, or the like. The saw blade will catch the clothing material, and pull ones arm and body right into the spinning blade.
An accident waiting to happen.
''Think safety''!
I made a similar sled works a treat and has 8mm i believe you call it plexiglass on top too see the blade.
@ James Walker...really nice job mounting the plexiglass.
Understanding the concern of the blade coming through the rear fence, I really like James Walkers solution. I think this could be taken one step further though and build an assembly that uses the front rail of the TS as a stop block.
Overall team, looks like we are on our way to designing the best table saw sled yet!! Thanks.
Unfortunately that is not "my" crosscut sled, as I don't have much of a sled right now, meaning I had a sled where now I have 2 half-sleds.
But when I do build another one this is what I want it to look like. That image I just used off the internet as an example to show that the blade is not exposed as the cut is finished.
Photo of a simple sled for cross cutting panels.
The fence-forward design allows you to cut wider workpieces
Stanley,
Go on YouTube and put in Eagle Lake Woodworking crosscut sled. The guy on there explains how to make a pretty good crosscut sled in fact I'm building one for myself just haven't finshed yet. Good luck.
Hi stanley go on woodworking for mere mortals ,i am sure i have seen you on there.
Thanks Michael Evans...actually I have been to Steve Ramsey's house twice now. We live in the same town about 20 minutes driving time from each other. Actually, I sent him an email last week to see if he built a new sled for the Porter Cable saw he was gifted earlier this year. I have not heard back from him.
Hi stanley, i never forget a face stanley.Merry Christmas.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service