I am interested in doing a humidor....has anyone attempted to do one and what kind of problems did you run into? There are a couple of tube videos on doing them, but they are contradictory in how to install the Spanish cedar. As always...looking for help.....LOL!!!!!!!
Tags:
That would be cool Chris....I would really like to see that, but it sounds like you built a HUMIDOR!!!!!.....like the walk in kind.....I am looking to just build a small one that may sit on a table......but I really would love to see pics of your brother in laws.....I did a wine cellar in a basement that we finished for some folks years ago....that was an interesting project.....that was the wildest basement we ever did.....just the basement remodel was pushing 150K.
American Woodworker has a plan Asian-Inpsired Humidor.
Chris,
A build of that size sounds like what may be called a "sauna" room.
I suppose it would work well to store cigars.
Chris Courtney said:
I built a 10'x21' for my brother in law and just did as if I were building a house. I used Roxul insulation throughout and reg house poly. Then strapped the walls and ceiling with 2"x3/4 plywood strips and installed the tongue n groove cedar over the ceiling first then walls. I don't have a real big or real nice setup so I kinda had to make do with what I have. The only real problem I ran into with my setup is I ran out of material once and had to order more so when my material showed up a few weeks later and I milled all my tongue n grooves they didn't line up bang on like I had hoped. So my advice would be to make sure you have enough material and mill it all at the same time so everything lines up perfect. Oh and give yourself just a little bit of play in your grooves so your not fighting to get them to fit together. Good luck and cheers!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service