Tags:
Here are the plans in pdf format
Potting Bench.pdf
Also a pictue I took last winter as I was finishing up my version of the potting bench. I widened it a bit and left off the right front cross piece so I can slide a calvanized trash can under the bench top to hold potting soil. I also want to add another shelf above the existing shelf.
Katrina, OH NO! Haha, I guess it makes for a good story though!
Here's the link you need to download the project plan so you can reprint it:
http://www.kregtool.com/project_plan.html
For future reference, you can always find that link in the right-hand column of this community. It's called "Download Kreg Project Plans" Good luck with your project, and post some photos if you can! Thanks for the laugh late on a Friday afternoon. ;)
Katrina are you looking for the one with planter's on the ends and the bench in the middle.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service