Kreg Owners' Community

I got my monthly E-mail From Highland Woodworking and seen this in it. http://www.highlandwoodworking.com/kreg-toolboxx-complete-system.aspx

I was wanting to find out some more info on this kit, but I could not find any thing on it at http://www.kregtool.com/.

 

 

 

 

Read KregRep's official response:

Views: 24579

Reply to This

Replies to This Discussion

Here are the pictures of the Husky made or rather, offered by Husky. Same exact except Mines is gray, Yours is Blue.
Attachments:
I got a factsimili last year at Home depot (empty) for $29.00. I now heep all my drill attahments and cordless drills in it plus a lot of other tools. Mine looks deeper than the pictures of this Kreg box. I have easily  kept 2 Black & Decker cordless drills, a cordless Chicago 90 deg 18 volt and 2 chargers for the drills plus 2 drill indexes and 2 Kreg clamps in this box and the top with the cubby holes has compartmented space for many many screws and other small stuf.  

Allan Perret said:

I already have 2 Kreg jigs and LOTS of screws. 

I would like to be able to buy the new toolbox only without the screws.

I already have so many Clamp and screws the box will not hold them all, I will have to get two boxes, plus I have three of the Master systems, so I guess I will have to break it down and have a carry box, hope it big enough to carry a drill to
Nifty Idea! I could use 2 of them. One with my Kreg tools and a second one for my model railroad tools.

The Kreg boxx is 6.75" high, and that Husky box is 9.6" high.......sad they did not make it bigger, like they don't want you to buy more clamps....?

 

I wonder if I pulled the trigger too soon......;-(

 

Frank

Sorry the part that i listed as a mini jig was a typo i meant to state micro jig. That is 44.95 if you did the research. the mini is 19.95.  

Ed Martin said:
The Kreg box looks like a keeper.  I look forward to getting one.

You forgot the microjig for $45. Might get it cheaper somewhere else, didn't do much shopping.

Looks nice, but $60 for a plastic box?
I just returned from Home Depot where I examined the Husky box. It is considerably larger than the Kreg version and is only $30. (Of course, you don't get the screws.) I'm still going to buy the more compact Kreg version. I already have a few very large tool boxes that I can barely carry when loaded. So, for me, I'm better off "these days" spreading out the load even if it means more trips from the truck.

Yes, I've gone back and forth. I think I'm still going to keep my order in for the two smaller Kreg boxes....I'm in the process of downsizing to a smaller home, and I think I just want a box to fit my Kreg stuff without a lot of other tools. Hopefully this will be a good decision.

 

If they really are limited, worse case scenario, (no pun intended) I'm sure I can resell them.....

 

Frank

This will be an addition to my set looks great.
Definitely on my want list!
Check out the Husky Model # 17187311 available at Home Depot for $29.97.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_