Tags:
I had used the trial version of Cut List Plus for several years, and the trial version works very well. The only problem is that it limits the # of parts, 5 I think, that you can add. Last year I decided to purchase the full version and have not been sorry yet. You can figure out all the parts you need plug them in, tell it what lumber you have available and it will give you a a cut list and show you the most efficient way to make your cuts with the least amount of waste.
It takes a little while to learn, not long. There is more than just the cut lists, but that is what I use it more for. In the 2 years I have been using the full version, I guarentee I have saved much more than the $90 purchase price in the lumber I have saved. There are more expensive versions of it that allow more parts, but for me 500 parts is plenty.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service