Tags:
Thanks James
I wonder why these instructions were not included with the K4.
Can I download a K3 manual?
Thanks again for the info.
Greg
James Waller said:
Thanks Again
You are a real Kreg Wizard
The Manual that came with the K4 is only about 5 pages long.
This is a real help.
Have a good one.
James Waller said:
Here is a link to the PDF file for the manual. Please remember that this is the K3 and some things will be different cause both jigs are different. But there are a lot of stuff here that pertain to both jigs and will benefit you by filling in the gaps that are not in your K4 manual.
http://www.rockler.com/tech/RTD10000075AC.pdf
Have a good day!
Thanks to this question....I bought two jigs and felt robbed..not even one piece
of paperwork came with them. i had already shipped one to my son and he hasn't
used his for the same reason. Hopefully I can download something to help.
Kreg in Venezuela want to sell I want to buy more tools, in Venezuela there Kreger,carpenters jill Kreg ask me a lot ...
Thanks to this question....I bought two jigs and felt robbed..not even one piece
of paperwork came with them. i had already shipped one to my son and he hasn't
used his for the same reason. Hopefully I can download something to help.
Kreg has ''lots'' of information available---
''peruse'' their website listings.
They have more information, than most people are aware.
If you are missing or need anything,
you can email Kreg---
contact their customer service support---
tell them what you need or want---
you'll get an answer faster than from any other business.
Their staff are knowledgeable and very helpful.
Thanks Kreg for your great customer service support.
I have many Kreg products---
they are great tools.
================
The warranty nearly expires before I can get an answer from some businesses.
When using a drill/driver, start with the lowest torque setting.
Gradually increase the torque setting, up until the screw seats firmly.
A quarter over-torquing of the screw, will result in the screw loosing the required grip in the wood.
Practice on a scrap piece of wood, adjust the torque, until the desired tightness is achieved.
Works for me.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service