Kreg Owners' Community

Does Kreg Have a Micro Jig Mini like the mini for the big brother? I am attaching some arched spreaders  to tapered legs of a table. The spreaders are on the diagonal and are 7/8s of an inch going into 1 1/8 inch tapered legs.Sure wish they mede a little single black jig with a 5/16 drill bit as the blue one is just a tad to big, but  it might work.

Views: 232

Reply to This

Replies to This Discussion

Hi Robert,
Test piece seem to work ok. But its just a small piece og ley attached to a reject spreader I had. Got to figure out a way to clamp them too so they dont move when the screws bite. But that shouldnt be too hard.

Still, Id prefer to use a smaller drill bit in piece like this. So hey you guys at Kreg, when are you coming out with a micro mini?

Thanks for the tip Robert
Robert it went real smooth, but it is a good thing I save all my scraps till I am done because I needed the piece I cut the arched spreaders out of to give support so I could clamp the thing. It had the perfect matching curve and one flat side. So save everything till you're done.

I just finished the table. I could not have done it without the greg mini jig.

Yes! We need a Kreg Micro Poket Jig Mini.

 

It is needed for working on smaller stock, smaller projects.

Here, here! I totally agree. Come on Kreg, get with the program! Also, fix your spell check on here so it doesn't show "Kreg" as a typo.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_