just wondered what everyones favorite or most used type and brand of finish to use.
i use mostly minwax since its easier to get where i live. i do like deft lacquer sanding sealer. dries quick and sands easily. defts water based finish is good too. use that often as well.
Tags:
I almost always use min wax products also, I have used cabot but I thought it was a little harder to apply their stain then min wax, I use min wax wipe on poly most of the time, but sometimes I do use the brush on or the spray on. I would like to try other brands but for me to get them I have to mail order them.
I used to do alot of refinishing work and I personally do not care for Deft products in general however, due to its ease of location at Lowe's I do use Minwax products faithfully and think they provide a great finish...I am a big fan of their polycrylic for use over anything water based, ie. latex paints, stains, etc. I also use their finishing wax and their wood conditioner, sanding sealer, etc.. Have you ever tried Cabot brand stains, I will use them in a pinch, like when Minwax doesn't have my black in stock, Cabot has an Ebony but, it has alot of shine to it:-)
I almost always use min wax products also, I have used cabot but I thought it was a little harder to apply their stain then min wax, I use min wax wipe on poly most of the time, but sometimes I do use the brush on or the spray on. I would like to try other brands but for me to get them I have to mail order them.
My weak link has always been finishing... I am however starting to become a fan of Tung Oil.. works good and is relatively idiot proof (I've tested it : -)..
KLW
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service