Kreg Owners' Community

james wilhelm
  • Halifax, PA
  • United States
Share on Facebook
Share on Facebook MySpace

James wilhelm's Friends

  • Enrique Alvarez Romo
  • charlotte lockhart
  • Joe
  • Ken Reighard
  • Mike Atencio
  • Jack Haskins, Jr.
  • wayne davis
  • Ed
  • Ronda McElroy
  • Suzy
  • LANEY REECE
  • james e thompson
  • Wallace Scisson Sr.
  • Kent Kinsala
  • Michael mitchell

james wilhelm's Discussions

New plug cutter!!
33 Replies

Has anyone else bought and used the new plug cutter , it works ok in straight grain , not as well in cross grain , using yellow pine , have all three  bit,s   and hope to make some plug,s , but some…Continue

Started this discussion. Last reply by Gregg Stemmann Nov 8, 2020.

Happy New Year !!!
1 Reply

Want to wish all Community members a very Happy New Year  and a safe wood working year , JIM !!Continue

Started this discussion. Last reply by michael evans Jan 1, 2016.

Merry Christmas
5 Replies

Want to wish a very Merry Christmas to all the members on the Kreg Community , have fun and be safe  , JIM !!!Continue

Started this discussion. Last reply by James P. Cottingham Dec 30, 2015.

HAPPY THANKSGIVING
3 Replies

Just wanted to wish all the member,s on the site a  very nice and safe  Thanksgiving , JIM !!Continue

Started this discussion. Last reply by Elizabeth Leveques Dec 30, 2015.

 

james wilhelm's Page

Latest Activity

Gregg Stemmann replied to james wilhelm's discussion 'New plug cutter!!'
"I am having similar issues to others cutting cedar plugs, with my expensive kreg plug cutter. The plugs are all too short and end up at least a quarter inch too short and they are quite loose in the holes. Its hard to get the plug to stay were you…"
Nov 8, 2020

Profile Information

Which Kreg products do you own?
Kreg Jig K4 Master System, Micro-Pocket Drill Guide, Kreg Jig HD, Kreg Jig R3 (Junior), Deck Jig, Shelf Pin Jig, Kreg Clamps, Kreg Cutting and Measuring Tools
How would you describe yourself?
Advanced Woodworker
What's one interesting fact about you, your life, your garage, shop, or home?
retired and love to recycle wood !!!!!

james wilhelm's Photos

  • Add Photos
  • View All

Comment Wall (83 comments)

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

At 7:18am on March 26, 2017, michael evans said…

Jim have you a pic of that huge T.V. MOUNT you done with back board yet ? Sorry was a just a wondering. Mick!! 

At 2:29am on January 18, 2017, Thomas Sears said…

Discovered that pdf files won't open with Microsoft edge. I sent the link to Firefox and it opened. Guess Microsoft needs to fix THEIR problem.

At 10:40am on December 5, 2015, PJ said…

Thanks.

At 11:48pm on November 17, 2015, charlotte lockhart said…

Hi Jim like i said i am new. I Love Picnic table / bench is there again way I can get the plains to built it or buy. If this is wrong let me know. Really would love to make it 

Charlotte

At 5:33am on October 26, 2015, Stephanie H said…

Thank you for the comment and compliment. I think I have figured it out, there is a know it all in the "community" that really doesn't. I was wondering about the reference to the counter sink drill bits being shown as I have those. I thought maybe there was something I was missing, but then noticed a further comment about it and was wondering what the point is myself. So I left it alone. I don't understand ppl sometimes and their need to talk all the time and not say much in the end. I do appreciate you saying something because bad info certainly does not help someone trying to understand.

At 7:16pm on September 10, 2015, William Patterson said…

Thanks Jim, I really feel dumb about using the tip of the drill, can't wait for my next project with my Kreg Pocket Hole Jig.

Bill in Las Vegas

At 6:04pm on September 10, 2015, William Patterson said…
Can I just use wood putty or Caulk to fill in the hole I messed up?
Bill
At 9:24pm on September 9, 2015, William Patterson said…

I can't wait to try it from the STEP and not the TIP. :-) I just watched the videos again and yep got to the step, not the tip. Now if I can just find some more wood on my walk to wally world tomorrow.

Thanks,

Bill in Las Vegas

At 4:34pm on September 9, 2015, KregRep said…

Hi William, the problem may be with the settings on your jig or drill bit. Setting the jig to 3/4" means aligning the Drill Guide Block with the 3/4" mark, if you are using the Kreg Jig K3, K4, or K5 model. Also, you need to align the STEP of the drill bit to the 3/4" mark, not the tip of the bit. Here are a couple of images from the manual that may help.

If you are using the Kreg Jig R3, make sure you have the Sliders aligned with the 3/4" mark and, once again, the STEP of the drill bit (not the tip) aligned with the 3/4" mark in the case. Her eare images:

If you continue to experience problems, you can contact our Customer Service Department. They'll be glad to help you.

KregRep

At 2:16pm on September 9, 2015, William Patterson said…

I have another nightmare. Building and second shelf, same as before only bigger. The Kreg Screw chart and the youtube videos say if you are using 3/4" plywood set the Jig at 3/4" and the drill bit at 3/4" and use a 1 1/4 Kreg Screw. I did and it didn't even get enough bit on the wood to hold it upright. What am I doing wrong?

I finally pulled out the Kreg 1 1/4" screws and without the jig, using the Kreg Drill Bit guesstimated a quart inch more and it is standing on it's own. I must be reading and viewing everything wrong but what am I doing wrong.

Hep! I'm in over my head...

Bill in Las Vegas

<>/p>

At 6:43pm on September 7, 2015, William Patterson said…

James,

One of the toys I bought today was the Kreg Rip-Cut. I checked out the videos on you tube and they all looked like they were sawing flat on a table, are they sacrificing a table? Is there a good page that tells me how to properly use a rip cut, what to lay it on...

Man I know this sounds like a pre-beginner question but if there is a perfect way to use a circular saw? I've kinda been busy with keeping myself alive if you know what I mean. :-)

Bill in Las Vegas

<>/p>

At 2:14pm on September 7, 2015, William Patterson said…

Oh yes, I have a Ryobi 4 volt but it can't get a hole screw in with out me turning it manually to get it all the way in. 7.2 volt genesis sounded like it might do it. Thanks for showing me around. I painting my first project today, and it doesn't look too bad.

Bill in Las Vegas

<>/p>

At 2:11pm on September 7, 2015, William Patterson said…

Thanks James, The one I liked was the SNAP ON but seemed a bit for a guy who is looking for scrap wood. :-) Sooooo I popped over to Amazon and grabbed a genesis for $29, I'll save up for the Snap On one. :-)

http://www.amazon.com/gp/product/B008CCE7H0?psc=1&redirect=true&ref_=od_aui_detailpages00

At 7:38am on September 7, 2015, William Patterson said…

Thanks James and Welcome Home! I checked out the shorter driver on Amazon but unfortunately (or fortunately) I ended up with an additional 3 items. :-)  I'll need a new shop just to hold my Kreg stuff.

Do you have the model number or exact name of the mini cordless driver? So far everthing I've made around the house now is made out of old wood I've found around. Haven't driven since '88, Neurologist said it would be dangerous for all concerned, so getting wood is a oooh there is a piece of wood someone is throwing out. ;-)

Thanks for the tips. I'm blown away at the slide show going on above me, you are too cool.

Bill in Las Vegas

1st Inf. Div. Vietnam 1965-66...

<>/p>

At 1:45pm on August 18, 2015, KregRep said…
Hi James,

Thank you for informing us on the issues you are having with video views. We filed a report with Ning Support this morning and here's what they had to say: "Thanks for getting in touch with our team! We’ve already filed a report related to this issue with our engineering team. I’ve gone ahead and added your network and your ticket number to the report. We will follow up with you in this ticket once the issue has been resolved by our engineers."

We'll be in touch with updates. Hopefully they can get this issue resolved soon.

Thanks!
KregRep
At 10:50pm on June 18, 2015, carol said…

hey jim, still working on how to fix the top of the grilling station

a few ideas:

a. laminate 3 layers of 3/16 birch plywood, waterproof it with epoxy, then glue the metal to the lvl. the 4 layers altogether will be the exact height of the existing mitered frame. maybe use construction adhesive to hold the metal in place, caulk with exterior silicone around the metal edge.

b. use my router to plane the existing pressure treated plywood 1/32 less than the height of the existing frame. drop the metal on the plywood and glue down

c. buy another piece of birch plywood exactly 5/8" thick. add the metal sheet on top to match the exact width of the existing frame.

d. take the whole dang thing apart and burn it all. the cedar makes a cool popping sound in the firepit :/

At 6:00am on June 16, 2015, Michelle Derby said…

Thanks Jim, I hope to do many more projects. I love my power pressure cooker. My favorite thing to cook is ribs, they are falling off the bone in 40 min. & tender. 

At 8:02am on May 18, 2015, KregRep said…

Good morning, James! Thank you for posting about the spammer and making us all aware. She has been deleted as of last night.

At 2:47pm on February 18, 2015, Suzy said…

Hi James, thanks for being my friend.

At 4:18pm on February 10, 2015, Ronda McElroy said…

OH, the router is a porter cable.  It came with 2 tops (got it without a box, so no instruction manual) and have been trying to figure out how everything works for a bit now.

james wilhelm's Videos

  • Add Videos
  • View All
 
 
 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

The Pocket Hole Joinery Book - Review

Posted by Daris R. on August 27, 2024 at 8:29pm

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_