Have 3 doors from 30's or early 40's
Decided to build headboard.Using Mountain White Ash for cap and matching legs.Put a 2-1'2 inch crown molding under shelf and square finales on top.
Tags:
Projects: My Humble shop
Location: Stanwood,Wa
Comment
It will be below mattress height
Jens,
A large pillow could be propped-up to cover the exposed holes,
or elevate the mattress.
Jens,
Minwax advertises a stainable wood filler.
http://www.minwax.com/wood-products/preparation/minwax-stainable-wo...
Have you tried Durhams Putty/Filler?
http://waterputty.com/repairs/
I've used this material, for many years, with satisfactory results.
Colorant can be added/mixed into the powder.
What wood putty will take stain this brand was suppose tr but it failed so I will cut it out and leave door knob hole open,besides it wont show when set up
Great-looking project Jens. Keep up the good work!
KregRep
Yes they make great workbench and glue up stations My nephew used 4x4's and glued plus through bolted a 4 foot wide table ran each pc through planner so he has a perfectly flat top and the built 4x4 frame and added drawers. Must weigh 500 -600 lbs
Jens,
Clever use of recycling old doors.
I got some old doors, from rehabs, cut-up the sections and recycled the old lumber.
Sure comes in handy for several other uses.
One big 'ol door was 2'' thick and clear ''pine''.
Flat doors make for nice work surfaces.
Thanks James, I have tons of old wood and things i do old log style bird mansions with barnwood and they are sharp, but Not as sharp as John in Canada
Nice job JENS , I also like to recycle wood , hate to see boards go to the landfills, thanks for sharing !!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community