IMG_0005
Comment
-
Comment by Mike Weingartz on April 13, 2010 at 8:10am
-
Looks great. Gives me the idea that I can fix the one we bought ten years ago.
-
Comment by Mark on April 10, 2010 at 10:18am
-
That's really slick!
-
Comment by Steve McCullough on April 5, 2010 at 1:28pm
-
That's the plan for the next one. Lots of lessons learned on this one (like I wish I had done better in math in school,and a drill press will drill a straighter hole than a hand held). Everything under the table top was cut from one 8 ft. 2X4. Some "pre finishing" will have to be done before assembly (referencing back to another thread on the home page).Thanks for the comments and I will be posting the finished project shortly with the decals and poly.
-
Comment by KregRep on April 5, 2010 at 1:17pm
-
Great project, Steve. Love the practical folding design! I could have seen you joining those bottom stretcher pieces with the Kreg Jig as well to eliminate the exposed face-screws there.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community