Kreg Owners' Community

Hi all,

I'm new to the forum and new to woodworking.  My dad left me his table saw and drill press, both 1950s vintage, but they work.  I decided that I would like to set up a workshop and get creative.  After talking to the folks at my local Woodcraft store, I bought the Kreg Master Pocket Jig System, and a Kreg DVD.

The DVD was "The Pocket Hole Solution To... Router Tables" with John Sillaots.  John recommended buying a table top rather than making one yourself, and I thought that the table top he used for this project looked nice.

My problem is, John never mentioned who makes that top, and after looking at the diagram and cut list, not one mention of the top was there either.  Well, OK, the exploded diagram has it shown in the drawing, labeled as "router table top" - but that's not much help.

I Googled around and was not able to find that top listed or pictured anywhere, never mind where to get one.  Does anyone know (assuming that you have watched the DVD or have seen the photo on the outside of the DVD case) who makes that top, or who sells it?

Thanks, and I hope that I can learn here and one day give back to the community.

Ed

 

Views: 1320

Reply to This

Replies to This Discussion

Ken, do Rockler tracks come with c'sunk holes for attaching?  I can't tell from catalog.

Ken Darga said:

If desired or as needed, an additional metal ''t-track'' or ''miter-slot'' bar can be added to most router table tops, work bench tops, or the like.


Most all come with the holes countersunk for #6 I believe. Be aware there are at least two sizes of t-track out there, the standard (sometimes called Heavy duty) uses 5/16" hardware and the "mini" which uses 1/4" hardware. Check out the Peachtree website, ttrackusa for some pretty good info on t-track.

Rick said:

Ken, do Rockler tracks come with c'sunk holes for attaching?  I can't tell from catalog.

Ken Darga said:

If desired or as needed, an additional metal ''t-track'' or ''miter-slot'' bar can be added to most router table tops, work bench tops, or the like.


Wow, I go away for a day or so and now see all of these great replies!  Thanks very much!

Ed

Ed,

     I just finshed up building this cabinet. The top I have on mine is from Rockler. It works just fine with this setup. It was a fun build. Enjoy your build.

Dave

Rick,

Yes, the Rockler tracks feature countersunk holes, to accommodate flat head screws.

Rick said:

Ken, do Rockler tracks come with c'sunk holes for attaching?  I can't tell from catalog.

Ken Darga said:

If desired or as needed, an additional metal ''t-track'' or ''miter-slot'' bar can be added to most router table tops, work bench tops, or the like.


John,

The tracks I purchase from Rockler, accommodate 5/16'' and 1/4'' size bolts---

5/16 & 1/4''  ''T'' bolts and 1/4'' hex-head bolts.

The cross-section of Rockler's track design, will suffice for almost all clamping operations,

in wood working operations.

I have yet to use them, in clamping jigs, for saw cutting logs or railroad ties.

John Schaben said:

Most all come with the holes countersunk for #6 I believe. Be aware there are at least two sizes of t-track out there, the standard (sometimes called Heavy duty) uses 5/16" hardware and the "mini" which uses 1/4" hardware. Check out the Peachtree website, ttrackusa for some pretty good info on t-track.

Right Ken - Forgot about that. I was ordering t-track from where ever had it on sale for awhile, Rockler, Peachtree, MLCS, Hartville tool...... Sorta found out the hard way that all t-track is not made the same:-(. I try to stick with Rockler as it will accept both but have, maybe 10 or 12 feet of Hartville tools' red stuff on hand right now. It takes 1/4".

Ken Darga said:

John,

The tracks I purchase from Rockler, accommodate 5/16'' and 1/4'' size bolts---

5/16 & 1/4''  ''T'' bolts and 1/4'' hex-head bolts.

The cross-section of Rockler's track design, will suffice for almost all clamping operations,

in wood working operations.

I have yet to use them, in clamping jigs, for saw cutting logs or railroad ties.

John Schaben said:

Most all come with the holes countersunk for #6 I believe. Be aware there are at least two sizes of t-track out there, the standard (sometimes called Heavy duty) uses 5/16" hardware and the "mini" which uses 1/4" hardware. Check out the Peachtree website, ttrackusa for some pretty good info on t-track.

Hi John,

I've purchased several t-tracks from Rockler---

http://www.rockler.com/search_results.cfm?srch=usr&filter=t+tra...

I also have some Bench-Dog tracks---

http://www.rockler.com/search_results.cfm?srch=usr&filter=bench...

Kreg's Klamp-Trak---

http://www.kregtool.com/Klamp-Trak-Prodview.html

The tracks can be installed in many wood working surfaces---

just route the appropriate slot and screw-em-down.

On occasions when I need a handy or specialized work surface or station, 

I cut up some plywood or mdf to applicable size---

mill a slot(s)---

fasten the track---

clamp the work station in place, ---

and ''do-it''.

Need an auxiliary work surface---

...for your work bench ?

...your saw horse(s) ?

...portable work stands?

These are the way to go.

I made an auxiliary work surface, 24'' x 24'' x 1'' thick, for a drill press.

Located several tracks, spaced at 4'' apart, and

bolted the fixture to the drill press table.

This fixture turned out to be very efficient. 

Sorry, I don't have any pics---but, I'm sure you can visualize it. 

The 1/4'' size is most suitable for most smaller tasks at hand.

I keep a good assortment of 1/4" hex head bolts and 't-bolts'', 1" to 4'', on hand.

One can make clamping knobs by 

inserting a 1/4-20 ''T-nut'' into a block of wood.

Machine a block of wood---a suitable size for various clamping tasks---

shapes such as rounds, rectangles, ovals, crank styles, etc---

the list can go on-and-on.

John Schaben said:

Right Ken - Forgot about that. I was ordering t-track from where ever had it on sale for awhile, Rockler, Peachtree, MLCS, Hartville tool...... Sorta found out the hard way that all t-track is not made the same:-(. I try to stick with Rockler as it will accept both but have, maybe 10 or 12 feet of Hartville tools' red stuff on hand right now. It takes 1/4".

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_