Shelf Pin Jig - When ??
Hey Kreg folks,
I haven't heard much lately about the new shelf pin jig. Can you give us any info on it such as when it will be available or what it might cost?
Views: 761
Replies to This Discussion
-
Permalink Reply by Michael Campbell on
-
I bought my shelf pin jig from rockler about 8 years ago, what new one is out and how can they improve it?
-
Permalink Reply by Derrell Sloan on
-
Michael,
You can see a video of the Kreg shelf pin jig here:
http://www.youtube.com/watch?feature=player_embedded&v=gjQZFobWwLQ
It looks much shorter then the Rockler jig but it also seems more robust. I was almost bought the Rockler jig the last time they had it on sale but then I saw the one Kreg was coming out with. I love my other Kreg stuff so much I decided to wait for Kreg's new one to come out. Back in July (in the video) they said it would be out this fall so I would assume if things are still on scheduled it should be available soon.
-
-
i have a strip of 600mm (2ft) long piece of steel with equidistant 5mm diameter holes. the strip is about 30mm wide. I bought it from the hardware store for about $2. I have used it as a shelf "jig" for about 2 years now and never had a problem! I just clamp it on my workpiece and drill every hole or every other hole depending on how lazy I'm feeling.
-
-
I was kinda looking forward to seeing the bench klamp vise come out that they released in the same video. Now I have a project coming up that I will need a shelf pin jig for. Maybe Kregrep could shed a little light on this subject for us?
-
-
I guess I'll stick with my homemade jig for my router. One bushing for all sizes of pins, up to 3/4". I'm guessing when Kreg finally does come out with it I bet it will be at least twice what Rocklers costs. I am interested in the bench clamp too though.
-
-
I am also very interested in finding out what the cost will be. If it were 2x the Rockler jig that would be a deal killer for me. If it was in the $20-$30 range I would be all over it.
-
Permalink Reply by Jens Jensen on
-
give me address I 'll send you 6 sheets of pegboard
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
First time I really had a need for the ACS miter guide.
I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue
Tags: ACS
Started by Adam in General Woodworking May 6.
What thread and size screw to use 2 Replies
I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue
Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2022 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
