I am constructing a picnic table as one of my first few projects using Kreg pocket hole joinery. I converted the original plans that call for a 5/16" carriage bolt (to attach the top leg brace to the legs) to pocket hole joints. But I have a couple of questions and would like feedback on the project so far.
My primary question is regarding the strength of the joint. Will the joint with three screws and glue hold someone sitting on the table (not the bench) as well as the 5/16" carriage bolts?
Do I need to use three screws? Two from one direction and one from the opposite direction?
Is the blue screw resistive enough to weather conditions to last a number of years (10 or more)?
I think I will plug / fill the holes to help reduce corrosion.
See the attached PDF file which shows several pictures and explanations of the project so far.
All feedback is welcome.
Thanks
Bryan
Tags:
I built one last summer also. No screws visible in top or top of the seats. Used carrage bolts.
Hello everyone.. thanks for the replies. I will go ahead and reinforce the table using the original cross brace and carriage bolts on this one. In addition I do plan to use pocket hole screws for attaching the table top boards and bench boards.
Bryan
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service