Kreg Owners' Community

Hi everyone.  My current project requires I rip cut a few pieces and so I plan on using a table saw, but need to get a push stick (safety first, right?)....and recommendations on what you use and like?

I saw a video online demonstrating this one:

Views: 835

Reply to This

Replies to This Discussion

They can be purchased, or

simple push-sticks and push-blocks can be shop-made.

Here are a few options.

The grriper push-block system, is raved by many.

Pricey, but effective.

It emphasizes safety and that your hands are protected from a spinning saw blade.

For long pieces, they recommend two such tools.

NOTE: insure your working height is not too high, or else your forearm is exposed, when you reach over the spinning blade.

Insure that your hands are NOT in the "red-zone"---

the red-zone being the danger zone around or close to the spinning saw blade.

Paint your tablesaw insert plate RED, to act as a reminder.

It may be necessary to use TWO push sticks to make some cuts---expecially ripping.


When the cut is complete, shut-off the power to the saw, allow the blade to stop spinning, before removing the workpiece.

Use feather boards, to keep the workpiece firmly against the fence and on the table, when cutting.

NEVER cut thin strips between the saw blade and fence---they can get pinched, resulting in kick-back/ damage to the strips.

Cut thin strips on the opposite side of the sawblade, so they fall away from the blade.

Thanks, Ken...great information

Simple shop-made "push-stick":

3/4" dowel rod, 12" long, with rubber chair leg tips, on the ends.

Sand a flat on one side of the rubber chair leg tip, to prevent the rounded object from rolling.

Kreg sells a Multi-Purpose Push Stick. Along with providing safety in the shop, it has a handy pencil holder and removable locking depth gauge. Thanks to its narrow construction and ergonomic easy-grip handle, this Push Stick works great, even with the smallest of workpieces. You can learn more here:


I own the Kreg push stick for years now and still have it close by, but I also own 4 of the Micro Jig Units that Ken has told you about plus accessories they are by far the most safest units I have ever used on a table saw and I will never use a table saw with out them near by. I know many of  pro's and amateurs that have had hand surgeries due to table saws, 

Here is a good push stick I just built 2 one for myself and one for my neighbor.

Push sticks are like ear protection ... just make sure you use them!

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service