Tags:
Looking a lot better than my shed, but be happy with what you got and use your wits to make things work.
Really very nice job so far. Looking forward to seeing more as you progress.
David,
As a engineer and now retired carpenter you need more support or it could collapse. Yes it is stronger than nails, but the weight load was not intended to be carried by the nails, or the screws. The weight load should be supported by the wood. You may be able to use the plywood to support the weight spanning the rafters. A flatter roof requires more rafters. The rafters carry the weight load. The wood between the rafters is usually put there to keep the rafters from moving. You may be able to salvage the work by putting rafters under the cross sections and possibly the middle. You have heavy snow there. Worse case, 4'foot of wet snow could equal thousands of pounds. Sorry, looks pretty, I just don't want to see anyone get hurt.
http://www.grampasworkshop.net/jensnewshop.html
Dave here is shots of my post frame shop I built .
Jens,
A nice looking well built structure.
It's easy, when you know what you're doing.
Im sure it will stand up for many yrs.I submitted it not to hurt any feelings but to show others how inexpensive a shop can be built and means of putting one together
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service