Kreg Owners' Community

I have a sawmill that I directly deal with on a normal basis, but the other day I was hunting around Craigslist and found a gentleman that had a portable sawmill and had great deals on lumber.  He not only had "green" lumber, but also had some that is Kiln dried.  He also only cuts trees that have fallen from storms etc. and in peoples yards, no danger to forests etc.  Just a thought for everyone to think about before their usual trip to their supplier or the big box stores.  It also gives you the options for slabs that you usually may not have... like the 4x6x8 hunk of oak that I got for $10!!! 

Views: 468

Reply to This

Replies to This Discussion

I use a guy like that here in Washington he usually loads up downed trees  and hauls to his mill at home and cuts them and stickers up for resale.Lots of ceder and White Ash. Some times there is alder.I bought a whole pickup load of Ash few years ago mostly 1x6x  8-9 feet for 77.00 .Then I stickered the lumber for about 5 months extra and planed it and sized up for bed projects and bedside tables

 

I have for years visited the off beaten paths finding many good bargins in wood.  Not only is it cheap but sometimes it yeilds the best lumber you can buy.  This is especially true when looking for a special lumber for a special project.   One of my favorites is visiting old orchards that have been removed and replanted with young trees.  Often you will find large trees that have been limbed and are sitting in a yard and are either free to remove and or are dirt cheap.  I have other wood working friends whom will be glad to help with the removal and milling for a share of the wood. An example is about one year ago when we removed over a dozen black walnut trees and the person whom owned then offered to pay us to remove them.  We got better than 500 bd ft of prime black walnut that had been cut down almost five years prior.

Did you re-saw all of it  yourselves or run it to a mill

I just get it all rough cut Jens and then mill it myself.

Thats what I did  they planked it all out and I sized it all to specs

Justin,

Anyone wearing bib-overalls with 2-straps?

or are the single-strap versions still the '''in-style''? 

 

 

Doug,

     I'm not so far away from you in Va. and we wear shoes too!!!  Keep in touch, I'd be interested in some lumber!



Douglas Harwood said:

Justin,

I live in WV and yes we wear shoes, well sometimes, and in the winter when tress fall after a storm the local

park beside my home lets you come in with a chain saw and cut what you want.  A couple of my buddies and

myself always take some latex paint and cut 12 inch diameter(all my bandsaw will handle) logs or branches

and re saw our own boards.  White and red oak, poplar, cherry, beech, whatever you want and then saw up what

we don't need for firewood to dry for the elderly.  Make sure you paint both ends of your wood to keep the 

moisture in before re sawing so you are not in such a rush.  Bye the way, it's fairly easy to make you own

solar kiln.  Turners(lathe) prefer the wood green.  I get free Shaker styles legs for tables, beds and rockers

that way.

 

Regards,

Doug

2 strappers out here in Washigton

Ken Darga said:

Justin,

Anyone wearing bib-overalls with 2-straps?

or are the single-strap versions still the '''in-style''? 

 

 

Doug, be careful as now all the bush whackers will know which way you are traveling.    Have a great Thanksgiving. 

.

Doug,

One of my uncles, had one leg shorter than the other---

he just shortened one pant leg, 

and used both straps.

 

Some guys would just roll-up the one pant leg,

but that may lead to other issues.

 

Walking on the side of a hill???

...not a problem with some---

just return in the direction you came from, should remedy the situation.

 


Douglas Harwood said:

Ken,

I have to just wear one strap because my left leg is shorter than my right from walking on the side of a

hill all my life. Ha!

 

 

Doug could really confuse 'em---

wear one of his shoes ''backwards''.

Jay Boutwell said:

Doug, be careful as now all the bush whackers will know which way you are traveling.    Have a great Thanksgiving. 

.

Just the other day I got a bundle of slab wood for my wood stove from a local sawmill.  They have a scrap pile that I always check for boards.  Got some good ones out of there and free at that. 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_