I'm new to this community and have gotten great advice already. I have a new question for all. I have watched the videos of the router table from Kreg and they discuss that it can be used a joiner to. They briefly show the rubber strips to use; however, they don't actually demonstrate how its used.
I would love to know so that I don't have to go out and buy one. Can anyone direct me to a website that may show this in action? Or has someone in the community already demonstrated how to here?
Thanks again,
Nick
Tags:
Edge Joining on a Router table:
https://www.wwgoa.com/articles/one-great-tip/edge-joint-on-a-router...
http://www.woodworkingtips.com/etips/etip031114wb.html
http://on.aol.com/video/how-to-use-the-router-table-as-a-jointer-30...
If you're ''new'' to routers, I'd suggest obtaining some books on ''routers''.
Become familiar with routers before getting into table routing.
One book I recommend to my students, is ''Routers---The Missing Shop Manual''.
The tool information you need at your fingertips.
Published by Fox Chapel.
Ken, thank you so much for the websites. The aol site was the best one for me. Now I understand how to use the black plastic inserts on my Kreg router table. Now I can use it also on 3/4 inch plywood that needs a straight edge. Not long pieces though.
I have so many projects I want to do and glad I found this Community for Kreg users.
Nick
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service