I want to join two boards at a 45. I've cut both at 22 1/2 so that they will make a 45. These are 3/4" boards. I've looked at the video's that come with the K4 but they don't talk about the depth setting or lenght of screw. Naturally, I can do some trial and error, but I was hoping someone would have a technique worked out already.
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…