Kreg Owners' Community

Hello, does anyone know where i can get spare drill bits on line for a jack rabbit? I tried the manufacturers site and they say the bits are unavailable. I would appreciate some help because i'm rapidly running out of bits for the best drill and drive set i've ever owned.

Thanks.

Views: 644

Reply to This

Replies to This Discussion

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

Are they breaking or only thers work with the jig?

Try Rockler---

they offer something similar, that may suffice.

Our best set for any drilling application! 18-piece Rockler/Insty-Drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds — without re-chucking any bits!

Rockler/Insty-Drive 18 Piece Self-Centering & Countersink Set

http://www.rockler.com/product.cfm?page=10605&site=ROCKLER



Gary roofner said:

Are they breaking or only thers work with the jig?

They are excellent drill bits but due to wear and tear they sometimes snap especially when drilling at an angle. It's not that i'm rough with them or any of my hand or power tools it's just that breakages are part and parcel of serious woodworking. I've owned and used a lot of  drill and drive sets and the jack rabbit is the best by far. The only problem is replacing the drill bits.


I tried hartville tool and they have replacement parts but they don't stock one of the bits i need, it's the #8 or 1/8'' drill bit and they only ship to the U.S.A, Canada and Mexico. Thanks anyway,
John Schaben said:

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

Hmm, no member profile on this forum. Helpful to include at least a general location so we can filter our suggestions. Most other forums I'm on have a member profile so at least the country can be shared. Some also provide a place to list things like tools available. Really helps with queries like this.

thetoolnut said:


I tried hartville tool and they have replacement parts but they don't stock one of the bits i need, it's the #8 or 1/8'' drill bit and they only ship to the U.S.A, Canada and Mexico. Thanks anyway,
John Schaben said:

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

I live in Ireland, some American sites like Toolking and Ace international will ship to Europe. Failing that what i've done in the past is to use a friends U.S.A postal address and he then sends the package on to me. Thanks.

John Schaben said:

Hmm, no member profile on this forum. Helpful to include at least a general location so we can filter our suggestions. Most other forums I'm on have a member profile so at least the country can be shared. Some also provide a place to list things like tools available. Really helps with queries like this.

thetoolnut said:


I tried hartville tool and they have replacement parts but they don't stock one of the bits i need, it's the #8 or 1/8'' drill bit and they only ship to the U.S.A, Canada and Mexico. Thanks anyway,
John Schaben said:

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

Jack rabbit appear to have ceased trading. Pity, that's two of the best drill and drive sets i've ever had rendered useless.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_