Kreg Owners' Community

I have a large oak oval piece that is laminated with glue. It's a vertical door that can't be removed from it's hinges

Which jig do I use to drill a hole in the middle where a clamp won't reach?

Thanks for any help.


Views: 808

Reply to This

Replies to This Discussion

Gonna need some more information on this one. First off, why a pocket hole in the middle of a door??? How about a pic?

:) well it's a very old oak toilet seat lid that has come apart at on of the seams.

The screws that hold the hinges are rusted, so I can't get it off the toilet.

I wondered if there is a jig that would work out in the middle of the oval? 

Hey Den::  I live in Elk Grove, I noticed you are in Sacramento. First person from our area I have come across. I really enjoy my Kreg Jig. What a great invention n
I would take the drill guide with the three holes and place it on the bottom side of the seat figure out what thickness you need. Then take a small wood screw & screw the guide in place on the bottom of the seat. 

Den said:

:) well it's a very old oak toilet seat lid that has come apart at on of the seams.

The screws that hold the hinges are rusted, so I can't get it off the toilet.

I wondered if there is a jig that would work out in the middle of the oval? 

I didn't realize that that jig could be used that way. I'll take it out of the case and look at it again. I knew the jig could be screwed to a board. I'll check it out thanks

I often use my old Kreg Rocket jig screwed, rather than clamped to a workpiece.  Usually because clamping would be difficult, but sometimes when the extra screw hole hurts nothing it's just quicker and easier than clamping.  To me it is one of the strong points of yet another tool which Kreg should never have discontinued.

You dont need to screw it down just clamp it and remember about the extension

Well thinking that the there is the possibility of getting pinched in the back door would be one thing but getting poked with a screw in the same location could get very annoying, so  I think I would fix it right.

 I would drill out the rusted screws and remove the seat.  Take it to the shop and cut the split apart and repair it with dowels, a spline  or biscuits and reglue the seat seam. 

 Replace the old screws with either stainless screws or at least brass screws. 

Now that would be a oueeeeeeeeeeeeeee SPL

Thinks for all the replies.

Here's where I'm at... There is a split, 2 pieces of wood.

I have the jig, marked A B C and it does clamp "freehand" to the boards.

The boards ar 7/8ths inch thick.

Where do I clamp the jig in realation to the crack and the 7/8 mark on the jig?

Using the pocket jig i would place it on the wood with the setting for 7/8 in and mark its place on the underside of the seat. Use the crack as the theoretical end of the board and line up the gauge accordingly. Then remove the gauges from the sides of the jig so it will lay flat (They slide all the way off) and place it back on your marks and screw it down. HTH

Thanks sgt, I believe I have it now.

I see the total distance from the crack to the 7/8 inch mark (end of the jig) is 4-3/8th inch.



Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service