Kreg Owners' Community

After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. 

Then a friend who is also a Kreg dealer told me about the K5.

i bought one and set it up. I must say it's pretty impressive. The drill bit that comes with it is super sharp. Drills PH in soft maple very clean and quickly.

i have found myself pocket holing lots of shop projects and cabinets.

Only thing I can't figure out is setting the stop color on the bit for 1/2 " material.

I can set it for 3/4, but lost when it cones to 1/2 inch stuff.

Views: 345

Reply to This

Replies to This Discussion

Please contact our team at TechnicalSupport@kregtool.com or 800-447-8638 - they will be happy to assist you with this. Thanks!

I don't use a K5 jig so excuse my ignorance.

Can't you just set the jig height for 1/2 inch, put a U.S. nickel (5 cent coin) on the bottom of the jig, gently insert the drill bit into the bushing hole until the drill bit tip touches the nickel, adjust the depth collar until it touches the top of the jig bushing, and then tighten the depth collar set screw?

Dave, 

When working with 1/2" material and the K5 system, you will want to ensure that your drill guide block is set to the 1/2" setting.  Then using the setup block, you will want to have the tip of the bit going through the 3/4" labeled hole as this is the size of screw you will be using.  Just tighten down your depth collar and you are good to go.  Please let us know if you have any other questions that we can assist you with.  

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_