Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Wood choice for outdoor furnitureWhat is a good choice of wood for outdoor furniture? Can I use cheaper wood species and seal it? Started by Matt H |
9 |
Jan 21, 2013 Reply by joseph james |
Help fixing my cabinet doorThis is a cedar door I made a few years ago for an outside grill cabinet for an Big Green Egg. The first winter, the rail and style split j… Started by Scott Davis |
8 |
Jan 20, 2013 Reply by Scott Davis |
Older Craftsman Table Saw, 3HPSomeone has this older model craftsman table saw for sale, and I was wandering what any of yall thought about it? It is 3 hp but I have he… Started by Jerrod McCrary |
13 |
Jan 19, 2013 Reply by Rick |
Working with 1/2" thick woodI'm new to Kreg pocket hole fastening and I'm trying to build a simple 90 deg. butt jointed frame with 1/2" thick white oak. When I join th… Started by John Ekholm |
12 |
Jan 18, 2013 Reply by Rick |
wood not tall enoughI need to attach this 1 x 2 (22" long) to a 2 x 2 (26" long) but with each piece being only 1 1/2" tall the kreg jig can not mak… Started by scott |
10 |
Jan 15, 2013 Reply by Ken Darga |
Chop Saw AdjustmentI think my 10" Hitachi Miter Saw might be a degree or two off. Not too big a deal for the basic workbench I'm making, but I want to do a he… Started by George A. Williams |
4 |
Jan 12, 2013 Reply by George A. Williams |
woodentoolcompany home-made pocket hole kigHello again fellow Kregjig owners, I was wandering if anyone over the last few months has had any luck finding out how to contact the "wood… Started by Rodney Dennis |
1 |
Jan 11, 2013 Reply by Ken Darga |
New Master system owner and first projectHello- I picked up a Kreg Master System over the holidays and I am gearing up to create my first project. Project is going to be a walk in… Started by Lee |
5 |
Jan 10, 2013 Reply by Ken Darga |
Timber pricesHi all just bought some timber here wow its got expensive.6"x1" pine is now $1.60/£1 per foot.And western red cedar is hold on to your hats… Started by michael evans |
15 |
Jan 8, 2013 Reply by Ken Darga |
KREG RIPCUT DOES IT TRAVEL?I guess this one is for the Kreg Rep, in a nutshell has Kreg got plans too export the ripcut to the UK?Thanks. Started by michael evans |
3 |
Jan 8, 2013 Reply by michael evans |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service