Kreg Owners' Community

Hi all just bought some timber here wow its got expensive.6"x1" pine is now $1.60/£1 per foot.And western red cedar is hold on to your hats $4.81/£3 per foot.Interested to know the price for prepared timber over in the States see how it compares to UK prices,any ideas folks.?

Views: 437

Reply to This

Replies to This Discussion

Mike,

Mike,

8x1 red cedar is more readily available, in my area, than 6x1---

that's why I noted it.   (My local sources don't stock the 6x1).



Ken Darga said:

>>>.....

red cedar 8"x 1" ---$1.25 per foot  ..../span>

 

I do try ken but one gets fed up with useing manmade boards.Not looked into the price of oak yet,most of my oak i got for free .Thats when i was in the building game.

Ken Darga said:

Mike,

There is only a small volume of yellow and red cedar exported to the European countries---

perhaps one of the reasons for it's high costs.

http://commerce.alaska.gov/ded/dev/forest_products/pub/tree12f.pdf

Perhaps design and make your wood products from more readily available and cost effective lumber materials.


 

 

"FREE" is good...

My FREE oak source, ''dried'' up---gone to join the woodworkers in the heavens.



michael evans said:

>>>...,most of my oak i got for free ...br/>

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_