Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
screw sizes and different size woodwhat screw would one use to fasten 1" wood to 2" wood? Started by james e thompson |
13 |
Dec 6, 2014 Reply by Wendy Ratcliff |
Your planer opinions neededI am looking to purchase my first planer to add to my woodworking equipment. I would love to hear from you guys and gals that have been doi… Started by Jan W. Nahorski |
10 |
Dec 5, 2014 Reply by Ken Darga |
MDF PanelsHas anyone used MDF panel with the Kreg screws and system? Started by Art Scurlock |
2 |
Dec 5, 2014 Reply by norm manning |
Can I screw from wood into aluminum?I need to build a frame support and my hole will be drilled into wood, but it will be attached to a 1-inch by aluminum. I hope you can unde… Started by Michael B |
2 |
Dec 2, 2014 Reply by Michael B |
Why don't the plugs fit well?I'm testing out my new K4 kit and I noticed that the plugs do not fit in all the way to be at least somewhat flush. I ended up cutting abo… Started by ron defino |
4 |
Dec 2, 2014 Reply by KregRep |
Splitting/TearoutI am joining 3/4" with 3/4" wood at a 90-degree angle with my K4. I am using a 3/4" inch screw as directed but am noticing that either the… Started by Tony Ghaffarian |
4 |
Nov 22, 2014 Reply by Paul E. Pierce |
Attaching corner blocks to a table apron using the Kreg jig?I have a table to repair with 2 broken corner blocks. They were attached with glue and staples. I'd like to make new blocks using glu… Started by Dale Carpenter |
3 |
Nov 21, 2014 Reply by Tom Moores |
HELLO THEREHi I am Glen, originally from Chicago but stationed in VA with the Navy. I am beginner wood worker but I have figured out that it is really… Started by Glen Redmond |
3 |
Nov 21, 2014 Reply by Glen Redmond |
Let me introduce myself...Hi, I'm Chris from Ontario. I love DIY and carpentry, the projects I work on tend to be millwork, flooring & built ins. We recently b… Started by chris kauffman |
4 |
Nov 19, 2014 Reply by chris kauffman |
Keeping a right angle between two mating partsHello, When I join two pieces together using the Kreg pocket hole the mating part with the screw clearance is pulled toward the side of the… Started by Bill Brace |
3 |
Nov 18, 2014 Reply by Derek Gould |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
