Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Pocket Holes not deep enoughMaterial I used is 3/4" plywood & 1 1/4" pan-head course screws. I set the collar for 3/4" depth and after I drill pocket hole and I fa… Started by Trevor Roeder |
14 |
Apr 25, 2015 Reply by james wilhelm |
Bee Hive AssemblyI have been building bee hive boxes for a number of years now. Up until recently, I used finger joints to join the boxes together which is… Started by Michael Dennard |
2 |
Apr 25, 2015 Reply by Tom Pynaker |
FearI got a Kreg Jig for my birthday this past weekend. Although I am excited, I am scared to start using it. I want to make a book shelf as… Started by Amelia Cook |
6 |
Apr 23, 2015 Reply by Johanne Perez |
How long is the K4 jig?I'm seriously thinking of getting the K4 jig and I'm wondering what is the exact length of the jig. I have a lot of other Kreg tools and I'… Started by Ed |
3 |
Apr 23, 2015 Reply by james wilhelm |
Building and Installing CabinetsRecently was involved is a discussion about hanging cabinets and noted that some do not know how this it to be done in a safe manner. Hung… Started by Jay Boutwell |
10 |
Apr 22, 2015 Reply by Jay Boutwell |
What kind of saw should I get?I want to build a book shelf for my first project. I would like to purchase my first saw, but I am not sure what to get. I was looking at… Started by Amelia Cook |
6 |
Apr 21, 2015 Reply by Michael McLemore |
Part Two: Building Cabinet Door and Hanging DoorsFor part one you will have to go the the discussion section as ning will not allow me to post two parts at once Part two of two. By de… Started by Jay Boutwell |
1 |
Apr 19, 2015 Reply by james wilhelm |
Building Cabinet Doors Using Router Bits and Hanging Cabinet DoorsPAGE ONE OF A TWO PART DISCUSSION BUILDING CABINET DOORS AND HANGING DOORS: Attention Andy Harris Andy, in answer to your question abou… Started by Jay Boutwell |
0 | Apr 19, 2015 |
Building fish tank coverMy daughter, who helped with this project, needed a fish tank cover. I designed it with panels of aluminum (for weight control) and front a… Started by James W Johnson |
0 | Apr 19, 2015 |
New member-First projectI recently became interested in woodworking and took the leap to make my first project ever! I used the Kreg Jig 5 to make the Hutch/Bench… Started by Brett Payne |
4 |
Apr 17, 2015 Reply by Brett Payne |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service