Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Torsion Box portable workbench.Okay......Im guessing that Kreg wouldnt come out with one of these BUT.....does anyone think that someone could make a torsion box with a K… Started by Larry Crouse |
6 |
Nov 13, 2017 Reply by saddiq brothers |
Type of Wood?Hi, I am looking to build a blanket trunk for my daughter but I can't seem to figure out what type of wood is in this picture. Does anyone… Started by Philip Miller |
4 |
Oct 24, 2017 Reply by Don Foley |
routers and router standsI am in the process of selecting a router and router stand. The problem is that the more I research routers and router stands the more I am… Started by tom hagan |
8 |
Oct 23, 2017 Reply by LenInSebastopol |
Toy boxLooking to make a toy box not a regular one but one that has drawers in it any body got a design for one Started by David J Agler |
2 |
Oct 13, 2017 Reply by KregRep |
Clamp and glue thin bordersI have a granite piece that I'm boarding with black walnut, 1/2" wide - 3/8" thick, that has an 1/8 lip over the top. Looking for some ide… Started by Don Anderson |
3 |
Oct 7, 2017 Reply by Ken Darga |
Design helpI need the help and ideas of the woodworking gurus out here, I have a space between the bed and headboard that keeps stealing my pillows an… Started by Michael B |
7 |
Oct 6, 2017 Reply by Robert Brennan |
problem joining a table leg to the baseI am trying to join a table leg to the base. the leg is 2" thick and when I set my jig for 1 ½ stock the height of the hole that the bit g… Started by Bradley Smith |
3 |
Sep 12, 2017 Reply by Trace Farthing |
Joining 5/4 boardsWhich screws are best for joining two 5/4 pine boards, 90degree in this case, Then best screws for 5/4 board to 2 x4's I have both HD jig a… Started by Kent |
1 |
Sep 3, 2017 Reply by Ken Darga |
PallettHi folks I believe I saw a news letter on how to regonize type of wood used for palettes any help would be appreciated Started by Allan Garant |
1 |
Sep 2, 2017 Reply by Ken Kortch |
Drilled wrong depthPretty sure I drilled wrong depth. What is the best solution? Just try redrill deeper depth at the ones I already Drilled? Started by Robert yost |
1 |
Aug 31, 2017 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service