After drilling countless pocket holes the past couple years My shoulder is getting worn out.
I'm going to have to take up donations for a kreg foreman lol
I'm most likely going to start a YouTube channel as well to help others out with ideas and builds as well as sketch up etc...
Kreg ... Your jig has served me well and honestly it brought back the excitement of woodworking for me a couple years ago and I have been going strong ever since.
Tags:
I'd settle for a K5! It came out shortly after I purchase the K4 Master System. While working with a 24"x30" piece of 3/4 plywood, I thought that if they had one that you could work the clamp from the front, it would be perfect.
Tim , good point on the k 5, if the foreman is not in the budget right now , that would be the way to go , until you can save enough to buy the foreman , have a good wood working day , JIM !!
Tim Grace said:
I'd settle for a K5! It came out shortly after I purchase the K4 Master System. While working with a 24"x30" piece of 3/4 plywood, I thought that if they had one that you could work the clamp from the front, it would be perfect.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service