Tags:
Richard,
without knowing the specifics of your project, available area, design preferences, etc, makes it difficult to point you in a specific direction. However I am including a link to several plans for cabinets which include face frame and frame less kitchen cabinets, since a vanity is a cabinet with a sink in it. For information on sizes the builder installed vanity in my hall bathroom measures 21" from wall to front of face frame, 31" from floor to bottom of counter and 36" wide. width seems to be the biggest variable in building a vanity. I've also included a link to the vanity I built for the master bedroom alcove area. Sorry I do not have plans drawn up I can send. Maybe Jay or some of the other more experienced builders can jump in with some advice.
Cabinet plans (lots of them, all types)
http://www.freewoodworkingplan.com/index.php?cat=417&topic=wood...
My vanity
http://kregjig.ning.com/photo/albums/bathroom-vanity-and-mirror-frrame
Best of luck with your project, Don
I like your vanity cabinet. Well, Richard, you can have a furniture style vanity with a elegant tile on it give a sophisticated look or even have a beautiful small round vanity.
Don Foley said:
Richard,
without knowing the specifics of your project, available area, design preferences, etc, makes it difficult to point you in a specific direction. However I am including a link to several plans for cabinets which include face frame and frame less kitchen cabinets, since a vanity is a cabinet with a sink in it. For information on sizes the builder installed vanity in my hall bathroom measures 21" from wall to front of face frame, 31" from floor to bottom of counter and 36" wide. width seems to be the biggest variable in building a vanity. I've also included a link to the vanity I built for the master bedroom alcove area. Sorry I do not have plans drawn up I can send. Maybe Jay or some of the other more experienced builders can jump in with some advice.
Cabinet plans (lots of them, all types)
http://www.freewoodworkingplan.com/index.php?cat=417&topic=wood...
My vanity
http://kregjig.ning.com/photo/albums/bathroom-vanity-and-mirror-frrame
Best of luck with your project, Don
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service