Comment
If by PDF you mean plans, then there isn't. As I said before the dimensions were dictated by the drill press size, scraps available and my comfort working height.
How do I get a PDF file the chest so I can build one for my shop.
Khalid
I am just in the process of redoing the shed. I don't get the cold you guys do but I do get the heat 40 deg Celsius plus in summer and only 0 deg winter so I have been looking around for ideas, yours has gone to no: 1 on the to do list
Regards Michael
Thanks for passing by Michael.
great looking project
regards Michael
Good looking stand, Khalid.
Jay,
I built a similar cabinet to hold my drill press and hollow chisel mortiser back to back. I started with plans from Chiefs Shop for a mobile tool stand. I made it taller, enclosed the sides and added drawers similar to what Khalid did here. I'll shoot some pics and post it on the site soon. Like Khalid's mine was constructed entirely of left over wood from other projects.
Don
No plans. The project dimensions were dictated by the tools and the scraps available. Sorry for that.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community