We're happy to announce that the much-desired Kreg Screw Selector Wheel is now available! Many of you may remember the previous laminated paperboard version that we released as part of our Toolboxx™ Master Collection. In response to great customer interest, we have created an all-new, highly durable polypropylene version.
The handy Screw Selector Wheel makes it easier than ever to build projects with Kreg Joinery™. Just dial in the thickness of each piece to be joined—whether those thicknesses are the same or different—and the Wheel shows you the correct screw length and Kreg Jig® setting.
Key Features include:
The Screw Selector Wheel sells for $9.99 and is available at kregtool.com. You can purchase yours here. Screw Selector Wheels are also shipping out to our great Kreg Dealers now. So, if they’re not on the shelf at your favorite store already, they will be soon.
Tags:
Its terrible the shipping cost almost as much as the wheel . Wheel $9.99 and $8.00 shipping . I'll wait until the store is carrying .
Gary,
Here's another way I look at it---
If the wheel sold for $19.99, then the shipping would be less than 50% of the cost of the wheel.
This whole issue of information about screw selection could be easily addressed by using a "box chart".
Nine columns and nine rows. One each for 1/2", 5/8", 7/8", 3/4", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2 both
vertically and horizontally. This would provide 81 blocks, but only about 45 would be filled with a value
as the balance would be deemed "NOT RECOMMENDED"
This should be part of the owners manual !!!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service