Aloha everyone, My name is Tyrone and I am from Hawaii. I am a beginer at building with wood. The Krge Jig has made it clearer on how to join wood together with or with out glue. I have down loaded the instructions from Kreg's website on how to build a work table etc...
Now I feel I am ready to build me a storage shed. I have a problem. I'm not sure how to measure or framming a shed. Would some one help me with a how to design a storage shed? I would really like to use my Kreg Jig to frame my shed.
Thank you very much.
Tags:
Aloha David,
You have a very awesome storage. Is that a eight feet high? I would like to build one eight feet high, twelve feet wide, and fourty feet long. Double pitch. I'm not sure which would be best for the foundation. One- I was thinking of laying concrete, two- use pillers, or three- both.
How long did it take to build that? How many people were involved? The out come is rewarding.
Thank you,
Tyrone...
David Dean said:
Sorry about that I got three jobs to do they just pop but what you need is a squair post building my add on was made out of pellets .
http://www.grampasworkshop.net/jensnewshop.html
Here is my shop I built it myself and it is pole barn style.No concrete and no pier blocks. Footings are actually four feet six beep and two sacks on redi mix in each hole.Pt post on top and plumb and back fill with sand ,Notice no studs and girts and purlins.This is bty far the cheapest way to build and fastest. I did mine 2005 or 6 and being I did this for a living I spent 2 grand including permit and concrete floor. It is 16x24x 10.Ill send interior picture s in a little bit
http://kregjig.ning.com/photo/albums/my-humble-shop
Interior of shop
http://kregjig.ning.com/photo/albums/my-humble-shop
Here is my shop I did not use concrete or blocks,I built it pole barn style .
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service