Tags:
I enclosed two sides and add three draws to the left side. It makes storage of all the ring inserts and router tools more convenient.
Steven, there might be a video in works here at Kreg to help you do exactly that! ;) Stay tuned.
Hi
I'm interested in the same thing and would appreciate pictures, cut list and/ or video.
In a separate question, I'm featheboards I want to use on my Kreg Router table but I don't have the correct hardware to fit into the track slots. What size screws do I need to buy to fit featherboards into the tracks on the Kreg Router table?
Many Thanks
What size screws do I need to buy to fit featherboards into the tracks on the Kreg Router table?
Many Thanks
====================================================
I used the Rockler t-bolts and just ground down the sides to make them fit. It is frustrating a every manufacture uses a different size, Example: Kreg, Festool and Rockler all use different size t-tracks and different size t-bolts.
Here are two photos of the drawer build in progress. The center will be enclosed. The top half will be a dust collection area, and the bottom will be storage.
Greg
Hi
I'm interested in the same thing and would appreciate pictures, cut list and/ or video.
In a separate question, I'm featheboards I want to use on my Kreg Router table but I don't have the correct hardware to fit into the track slots. What size screws do I need to buy to fit featherboards into the tracks on the Kreg Router table?
Many Thanks
Thanks Steve, these are great photos and a Great Idea to maximize space.
How wide are you making your drawers?
Thanks again
Hillary, They are not Steve photos I posted them, Greg Powers.
The width of the drawers depends on the size of the router motor/list. The drawer box fits right up to the side of the router/router lift. I built a box to enclose the three drawers and installed as a unit. One on both sides on the router motor. Building a box also keeps the sawdust out of the drawers.
Hillary Devere said:
Thanks Steve, these are great photos and a Great Idea to maximize space.
How wide are you making your drawers?
Thanks again
Thanks
Keep up the Great Work!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service