The idea came from Family handyman.
I had two pieces of latice shortest was 29 1/2 inches and a piece of plywood 22 3/4 by 32 inches. So from that trimmed the pieces to dimension from scrap bin. Dimensions 29 1/2 x 22 3/4 . Just arbitaily set height to 30 inches.
Tags:
Projects: Garden tool cart
Favorite of 1 person
Comment
Thanks for your comments .
Ken there is very little weight on the latiice but on the plywood base the lattice is very flexable should not fracture.
Great idea Gary.
Gary,
FYI
I'd suggest making a double layer of the lattice fencing---
the thin PVC members are subject to easily fracturing.
Double layering will increase the resistance to fracturing.
(More so in the northern regions, where exposed to sub-zero temps---
the PVC will easily fracture).
Also, the clearance holes, where the screws go thru the plastic, need to be much larger than the screw diameter.
Use a large diameter flat washer under each screw head.
The wood will expand/shrink at a greater rate than PVC,
when this occurs, the PVC will fracture.
Gary neat Idea , good storage and portable , thanks for showing , JIM !!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community