Thanks. That would be fine! Sorry about the late response, but for some reason I didnt get notification of your response. 3117 W. Danbury Dr. Phx, AZ 85053
Have You Ever Though About Hooking Up With David Venable On QVC To Sell Your Kreg Jigs? A lot Of People Would Buy Your Items That Do Not Know About Your Jig!! QVC Reaches Out To Millions Of People You Can't, And Don't Reach!!
I wish I would have known before purchasing what I did that the Bench Klamp would not work with the Mini-Trak.I dont think I saw anything in the description stating that. I would have considered buying the larger Trak instead or another accessory in place of the Bench Klamp that would be compatible.
Sorry about the ambiguity. The crescents that I was referring to seem to be cuts into the anodized aluminum made by the drill bit or chuck that made the fastening holes in the bottom of the Trak. I can send a pic if you need one. Thanks for your quick response!
Hello. I purchased a few accessories for my jig and one of them was the Bench Klamp system. I also picked up a 48" mini trak and some of the Klamp blocks.It does not appear that the Klamp System and the mini-trak are compatible. Is this so? Also, the mini trak was cut with small crescents on one side opposite the mounting screw holes when they were drilled. Is this a persistent issue? I also have one of the stop/supports, but it didnt come with any hardware to attach it to the trak... I appreciate any assistance/information you can provide.
I would agree with Dave as far as this fence being a good option. Other than the Biesemeyer I am not real aware of other fences that will work with your Craftsman saw more accurately than the one that came with it.
I had a 10" Craftsman table saw that I added a Biesemeyer fence to and it served me VERY well for years. The fence cost about $250, but improved the saw trmendously.
Not a comment, but a question. Is there a table saw fence out there that will work on my craftsman 10" saw? Would like to hear from some of you what you would recomend. My fence is not very acurate and is a real pain to get set up. It is the fence that came with the saw that I bought about twenty years ago. Thanks Chuck Ward Laramie, WY.
Hey guys, I dropped into Woodcraft here in Greensboro, NC yesterday and picked up the Kreg Crown Pro. Great looking jig. I was throwing around getting the CutnCrown system which has 3 spring angle jigs. There system is between $150-200. Ouch. Luckily I found out you guys made something very similar. I just wanted to give you a heads up, I am going to be doing some experimentation with the jig to mimic the benefits of the Cut n Crown system. One of the main features of theirs was that you can flip the jig and not the miter direction so you eliminate even further any air in the joints. All cuts made from the left miter position with jig to the left. Have you guys thought about this before? Thanks guys.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
KregCS's Comments
Comment Wall (17 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Hi there do you have a conversion sheet from imperial to metric i can print and one in metric only PLEASE.
K4 Jig K4 Master System
Hi i am almost 54 and love working with my hands, whether its steel or wood and have quite a bit of tool for both hobbies.
Hi KregCS, Wondering if the Kreg Jig would be able to secure 2 pine crates together that Home depot sells, the outer edges only.
Cell: 716-480-7787
Email: prm387@gmail.com
Have You Ever Though About Hooking Up With David Venable On QVC To Sell Your Kreg Jigs? A lot Of People Would Buy Your Items That Do Not Know About Your Jig!! QVC Reaches Out To Millions Of People You Can't, And Don't Reach!!
Yours Truly,
Glenn Deel
glennzona@yahoo.com
I had a 10" Craftsman table saw that I added a Biesemeyer fence to and it served me VERY well for years. The fence cost about $250, but improved the saw trmendously.
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
New Members: Please Introduce Yourself!
Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
Bench
Bench1
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service