For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall (3 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Thanks John , GO STEELERS ,also make sign,s for other team,s , try to keep every one happy , HA! All my project,s are brush painted and I do my own lettering on all my project,s , have a great day , Jim !
John , I use exterior high gloss latex paint and high gloss polly, protects and a great shine, thanks for asking , Jim !
Hi John , also retired and love it too !!! When I set up my work station it was for gluing boards with biscuits !!! Also found that It work,s well for holding the boards when using the Kreg screws !!! You will need a table at least 4 ' x 4 ' , I screwed four 4 foot t tracks spaced out even to the table ! I made the four clamp boards out of 3/4 " x 1 1/2 " x 18 " and 30 " long , but you can use what ever size boards you want , the oak boards work well for me !!! I bought my t tracks from Rockler , you can buy the 17 pcs. kit or buy just the tracks , the kit # is 24063 and the 4 ft. tracks are 20054, they are not cheap , but will last a long time !! You will also need a few bar clamps , can get them from Harbor Freight , not to bad in price !!! Also sending you some pics. and hope this helps you with your shop set up !! If you have any ?,s feel free to contact me ! Have a great day , have fun building and be safe , JIM !!!