i’m finishing up my laundry room redo; i’ve mounted RTA cabinets (bought before i knew how to build a cabinet!), and built the base cabinet with pull out drawers that fits between the washer and…Continue
Tags: base, cabinet, laundry, drawers, out
Started this discussion. Last reply by Glen S Jan 29, 2017.
building a custom closet and before i begin, ordered both the 1/4" and 5mm jigs to try out.on plywood, using a slower speed, i get nice, clean holes with very little to no tearout. but the solid wood…Continue
Tags: jig, drilling, pin, shelf
Started this discussion. Last reply by Trace Farthing Jan 29, 2017.
I know none of my fellow wood workers, however experienced, would never do this but for my fellow female woodworkers:I'm in the garage trying to align the riving knife on my table saw, working on…Continue
Started this discussion. Last reply by Elizabeth Leveques Dec 30, 2015.
bought this today, and for the life of me i CAN NOT make it stay still in the T channel on my table saw...tried putting a washer between the flat head of the bolt and the channel, no luck.tried…Continue
Tags: featherboard
Started this discussion. Last reply by carol May 28, 2015.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall (3 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Hi Carol, just wondering how you fixed the top frame and metal plate on your grilling station , JIM !!
Ilike that bed. and tables. What plans did you use? I'm going to make Victorian furniture for my 1888 home.