Kreg Owners' Community

High all,

 My first posting on this board. I'm just putting together a shop area in my basement. I have a mitre saw on its own stand, Kreg router table, and a 10" drill press and now my Dewalt 7480 Table saw looking for a place in my plan. I'm looking to build a work table for all sort of uses, 3' x 6' basically, that I can seat it at one end. I've seen many pics on Pintrest of this setup but none of them had their fences on. My base is only 13"x30", but with the fence on and extended to 24" the rails extend to the right several inches, and I don't see that built in to any one of their plans. Am I missing something? Should I open up the area to its right, to let me use the fence in this way? 

Thanks in advance. 

Bill

Views: 989

Reply to This

Replies to This Discussion

Bill,

After researching the model saw you own, I think you hit the nail on the head.  To be able to use the fence to its maximum capacity you need to either open up the area to the right or mount your saw to the extreme right of the table, allowing for the fence to be extended.

Don

Hi Bill,

I have a similar DeWalt Saw. Take a look at the work bench I have posted on this site. Search for mobile work bench.    http://kregjig.ning.com/photo/albums/mobile-work-bench   Something like this may work?

Homer

Is there a remote change you still have the plans for that bench? I have a garage that is tightly packed to work in. I need something small and portable to help with the Saw Stop I am about to buy.

Homer Moyers Jr said:

Hi Bill,

I have a similar DeWalt Saw. Take a look at the work bench I have posted on this site. Search for mobile work bench.    http://kregjig.ning.com/photo/albums/mobile-work-bench   Something like this may work?

Homer

Sure do; i'll need your email and i will send it to you.

Homer

I appreciate you doing this. rebender_1@verizon.net

Thanks!

Bob

I am actualy building a bench similar to what you are describing. I saw the same pictures on pintrest and thought the same thing about the fence rail. what I am doing is I dropped the entire end of the bench lower so there isn't anything on either side of the table saw. I am then building a fold up top on the right side for use with wider cuts. when folded down i can use the stock fence. sorry i don't have pics yet. will post them when i finish it all up.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Edge joining 3/4 inch plywood 2 Replies

Started by Lynn Greff in Beginners' Zone. Last reply by Lynn Greff on Monday.

Where can I get a K3 owners manual.... 3 Replies

Started by John Chasse in Beginners' Zone. Last reply by John Chasse on Saturday.

HELP! Older Kreg Precision Router Fence, need parts! 1 Reply

Started by Dan Spaulding in Beginners' Zone. Last reply by Dan Spaulding on Thursday.

kreg production stop extension 1 Reply

Started by Pat Meeuwissen in Beginners' Zone. Last reply by Brad Martin 14 hours ago.

Layout/Project Setup Table 11 Replies

Started by Todd J Michalec12@gmail.com in Beginners' Zone. Last reply by Brad Martin 14 hours ago.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_