Hi there I'm a complete newbie to wood working.
I would like to build a set of draws for my computer desk, was looking at something like this but cut down.
Any advice
4X2 or what timber
Tags:
Chris,
I would like to help but cannot see anything using the link in-bedded in your text. If you can attach some pics of what you'd like, I'll gladly try and help.
Don
see if this works Dresser-2
Dresser by Zac Taubman Jan 12 2015
All I really wish to do fist is just make a simple ( Simple from a newbie hahah) 2 draw cupboard that I would place a sheet of formply onto of going latter to a computer holder of some sort, all being in a corner of the room.
was thinking of a draws of 350*760 out of 70*35 pine
photos show what I have now
Chris,
Ok, I was able to modify the url and I saw the pic embedded in your first post. To answer the question you posed to Zac, it looks like the material he built his frame out of is 3/4" or roughly 19mm thick. In the U.S. that is commonly referred to as "one by" ( 1 X ** ) if surfaced pine or 4/4 if rough cut hardwood.
After looking at the pic of what you have now, are you wanting to build something that fits inside one of the existing openings? or are you wanting to build a new cabinet with drawers?
If a new cabinet, I'm guessing you need it to be 760mm tall (since that correlates to about 30" which is the height of my computer desk). Assuming that is correct is the 350mm dimension the distance from left side to right side of the case or front to back?
Let me know, Don
ps. Here are a couple of plans for computer desks to help in your planning.
https://www.buildsomething.com/plans/P0ECF5F6F18E9C61E/DeskwithHide...
https://www.buildsomething.com/plans/P23BEB51E5ED70C7B/EasyHomeOffi...
I'm looking to put the top I all ready have straight onto of what I build, so depth front to back would be 350mm
width 800mm
existing openings don't matter as the are just legs not connected holding the top up and are all to be replace by new pocket hole build
Thanks Don for input
Chris
would that be what we would call 2X1 in australia
Don Foley said:
Chris,
Ok, I was able to modify the url and I saw the pic embedded in your first post. To answer the question you posed to Zac, it looks like the material he built his frame out of is 3/4" or roughly 19mm thick. In the U.S. that is commonly referred to as "one by" ( 1 X ** ) if surfaced pine or 4/4 if rough cut hardwood.
After looking at the pic of what you have now, are you wanting to build something that fits inside one of the existing openings? or are you wanting to build a new cabinet with drawers?
If a new cabinet, I'm guessing you need it to be 760mm tall (since that correlates to about 30" which is the height of my computer desk). Assuming that is correct is the 350mm dimension the distance from left side to right side of the case or front to back?
Let me know, Don
ps. Here are a couple of plans for computer desks to help in your planning.
https://www.buildsomething.com/plans/P0ECF5F6F18E9C61E/DeskwithHide...
https://www.buildsomething.com/plans/P23BEB51E5ED70C7B/EasyHomeOffi...
Chris,
I am not sure of the wood lingo in Australia. If you search this forum for plans you will find a thread that has several links to woodworking plans. Unfortunately they will mostly be in feet and inches. You can use an on-line calculator to convert to mm (that's what I've been doing with your posts).
Another option is to check out this forum. It's from Australia and the members speak metric very well. they may be able to offer more assistance than I can.
http://www.woodworkforums.com/index.php
Don
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service