I got a Kreg Jig for my birthday this past weekend. Although I am excited, I am scared to start using it. I want to make a book shelf as my first project. Am I being too ambitious?
Tags:
Hi Amelia. There is really no such thing as "too ambitious," especially when you're just getting started building with Kreg Joinery! We offer a couple free project plans on our website that walk you through the steps of building a simple bookshelf, a great project for beginners. You can download the free plans here: https://www.kregtool.com/get-inspired/Plans.aspx?source=1677. Please note that in order to download the plans, you will first need to create a kregtool.com account or log in if you already have one.
hi. just grab your jig and instructions. be sure and read the instructions that came with your jig. the only problems you might run into will be not getting the drill bit set right for the thickness of the wood being used. second make sure the pieces you are joining are clamped securely in place. if not they will move when you screw the boards together. when these two problems are taken care of you will find the kreg jig is a joy to use.HAPPY WOODWORKING most of all have fun.
Amelia,
Have no fear.
You will do fine.
I too was a bit nervous when I started out.
I practiced on a scrap piece of wood first.
After that I was ready to tackle my bench project.
mark
you got a great birthday present! don't be scared to use the Kreg Jig.
The best thing about working with wood is if you make a mistake, you CAN start over with another piece of wood.
Learn from your mistakes.
My first project was a shelf as well. It was a fun and challenging build for a newbee such as myself. it gave me the confidence to move on to some toy bulk bins I'm currently working on. It's a great learning experience. Take your time. Have fun!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service