Tags:
Hey everyone...I'm Leslie from Maryland. I became interested in building when I came across Ana White's web site. So far I have made a console, two matching storage shelf units, a mirror and other little things. My next project is to build an outdoor 8-foot tsble using reclaimed lumber. Love this stuff!
I am getting ready to build a couple of her kitchen chairs for our table once the weather warms up here in the cold north of Maine. Love her stuff and her directions are so easy to follow.
I am getting ready to build a couple of her kitchen chairs for our table once the weather warms up here in the cold north of Maine. Love her stuff and her directions are so easy to follow.
Leslie Baer said:
Hey everyone...I'm Leslie from Maryland. I became interested in building when I came across Ana White's web site. So far I have made a console, two matching storage shelf units, a mirror and other little things. My next project is to build an outdoor 8-foot tsble using reclaimed lumber. Love this stuff!
Hi, my name is Dennis and I live near Columbia in Mid Missouri. I have been a sometime woodworker off and on most of my life, but only recently got serious about it after building my house. Recently bought my first Kreg Pocket Hole Jig and love it! My wife wanted a coffee table that had storage capacity (see recently added picture) which I built with total pocket hole joinery.
Howdy I am 62 year old retired electrician of 35 years, who twisted his last wire nut. So I said! I live in Clearfield Pa. My Wife and I just recently purchased a new home that needs some tender care and I have always been fascinated with the Kreg pocket hole jig. We have a planter at the top of our stairs coming up from the front entrance that needed a counter top. I purchased the jig and went to it. I also laminated the top to closely match our existing counters. I would like to build my own counter tops to replace the old ones and add some custom cabinets to match the existing and move others. And if time sees fit I want to improve our home.
Awesome looking Willard!
Willard N Fyock said:
Howdy I am 62 year old retired electrician of 35 years, who twisted his last wire nut. So I said! I live in Clearfield Pa. My Wife and I just recently purchased a new home that needs some tender care and I have always been fascinated with the Kreg pocket hole jig. We have a planter at the top of our stairs coming up from the front entrance that needed a counter top. I purchased the jig and went to it. I also laminated the top to closely match our existing counters. I would like to build my own counter tops to replace the old ones and add some custom cabinets to match the existing and move others. And if time sees fit I want to improve our home.
Hello, My name is Raul and I live in small city in the Santa Catarina State - Brazil, I'm looking forward to learning more about the Kreg Jig and on improving my very basic skills. I bought the Kreg Jig K4 Master System last week and received today, I intend to use as soon as possible, however I need to buy wood for my first test and here we do not have stores like in the United States where there is almost everything.
See you!
Raul
Hi everyone, I have just joined here today and I look forward to getting ideas and have chats. As you can see I am from London so please bear with me as there is bound to be terminology differences. Looking forward to my first project using the Kreg jig, it will be a workbench for sure
Thank you
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service