Tags:
Hi All,
I am a retired and just always enjoyed woodworking. I now have the time to build a wood shop. I also enjoy restoring older woodworking machines. A few years ago I owned a wooden trawler and lived aboard. The sand paper and varnish never left my hand. I am currently building black cherry shelves around our fireplace and enjoy making jigs and cabinetry.
I thought the Kreg screw system was a "gimmick" and boy was I wrong! I am amazed how strong a joint it makes.
I used the Kreg mini to build my hole jig and set it up for 1/2", 3/4" and 1 3/4" screws. It is becoming my go to fastening jig.
Hi, my name is John and I live in Nova Scotia, Canada. I have some limited experience doing woodwork with a friend but am setting out to do some things on my own. Looking forward to using my Kreg tools to help in that endeavour. Recently built a shed to clear out the bigger things from my workshop to start the ball rolling. I can see that there's lots of good ideas here to help with my projects.
Welp i guess an intro is do. My name is Rigo from Houston,TX and im new to this whole building scene lol. i always been an outdoor person sports and all but just had a BABY!!! And now i spend most my time indoors (not complaining) And with him being 3 months i been catching a lot of infomercials and honestly the kreg DIY one i prolly seen about 30 times.. So i just jumped on the offer and well we should see how things come out..
My name is Alastair, I justed moved to Valdosta GA last October. I lived in Connecticut for 16 years. I moved to the US from Oxford UK. I am just over 7 feet tall and a Left below the knee amputee or LBKA. The house we bought has a two garages. So I have a place to go to do projects. New to Kreg but I bought a Kreg K4MS Jig Master System and a Kreg KMA2675 Kreg Rip-Cut
Hi all, my name is Doug and I live in VA, 20 short miles from DC. I love doing landscape projects, but after living in my current home for the past 15 years, I've just about done everything I can do without my yard starting to look like a nursery. So, I'm taking the plunge into woodworking; something I've always been interested in, but I have absolutely no knowledge of. I want to start off with some easy projects this Spring and slowly work myself into some more difficult, more gratifying projects. I'm looking forward to seeing and reading about all of your ideas and triumphs.
Hello Everyone, my name is Jayson. I am from Colorado Springs, Colorado and I am new to wood working. For Christmas, I got the Kreg Jig k4 Master System. I built the 2x4 Workbench and going to build a Book Case. Once I figure out this forum, I will post some pictures of my 1st project that I make with my Kreg.
My name is Alan and I live in Ottawa Ontario, just joined this group and am looking forward to some fun and learning some great wood working tips.. Have a few projects under my belt and am ready to jump in for the next phase of woodworking...Have a Kreg K4 system that I bought at the Woodworking show here in 2011 finally got my shop built and opened the box now it is open i am having fun using it. Amazed at the strength of the joints. experimenting now but ready for some good challenges..
Hello, my name is Jim and I live in Severn, MD..I've been wanting to get into woodworking for quite awhile...so since I'm getting closer to retirement I want to start my new hobby...I completed my first pocket hole project recently which I thought turned out pretty nice...a toy chest chest for my first grandson...looking forward to building more...
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service