Kreg Owners' Community

I have the Kreg Jig Toolboxx and it came with a screw wheel to tell me which screw to use, but my Kreg Micro Jig didn't come with one. How do I know how to set my drill bit and what screw to use? I haven't looked for a wheel yet. Was hoping someone could help me, or at least give me an idea of what to do...

Views: 925

Reply to This

Replies to This Discussion

Not sure if this will help you but here is a link to a screw chart

Screw chart

Ed, thanks for linking to the screw chart.  That is a very useful reference to keep handy.

Michael, your Kreg Micro-Pocket Drill Guide (https://www.kregtool.com/store/c22/kreg-jigreg-accessories/p60/micr...) should've come with an Owner's Manual. If not, or in case you can't find it, I have included instructions below:
You can also access the instructions here: https://www.kregtool.com/webres/Files/KJMICRODGB-Instructions.pdf.

The most important part of choosing the right screw for your application is selecting the correct screw length. We suggest using the screw lengths shown below when joining alike material thicknesses, such as 1/2" to 1/2".
If you have any further questions, please get in touch with the Kreg Customer Service Team by phone at 800-447-8638 or by email at customerservice@kregtool.com. They will be more than happy to assist you.

Attachments:

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_