Kreg Owners' Community

A few years back I bought a Kreg K3 Standard Pack with the intentions that someday I would upgrade to the full K3 Master Pack by just buying the K3 Upgrade.  I would like to do this upgrade now but all I see out there is the K4 and K5 and neither are offered as an upgrade, just full sets.  I have no need to buy another drill guide or more bits.   All I am looking for is the main clamp as pictured below.

Any ideas?  Thanks, Tim

Views: 500

Reply to This

Replies to This Discussion

Hofy,

The K3 is no longer available from Kreg. You may find one on Ebay or Craigslist or a seller on amazon but it will more then likely be hard to come by.

Ryan,

I realize the K3 is no more.  Is there any way to get the K5 clamp only.  As I have already stated I do not need the rest of the kit as I already have it. 

By "clamp" do you mean the  pocket hole jig "body" or an actual clamp that comes with the kit?

Tim,

 

Kreg doesn't sell any of the body only pieces.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_