Kreg Owners' Community

Ryan Zylstra's Discussions (14)

Discussions Replied To (14) Replies Latest Activity

"Heres a chart that may help"

Ryan Zylstra replied Dec 1, 2015 to Using Kreg with 2 sizes of wood

9 Dec 1, 2015
Reply by George Bokros

"Hello, What I would suggest, from personal experience, is to use the settings for t…"

Ryan Zylstra replied Nov 11, 2015 to What screw length and tool depth should I use for 23/32 plywood

1 Nov 11, 2015
Reply by Ryan Zylstra

"Position 1 is correct. 1-1/4" material and 1-1/2" material use the same depth collar…"

Ryan Zylstra replied Nov 9, 2015 to Drill bit stop collar

6 Nov 9, 2015
Reply by Mike

"Maybe the Portable Drill Guide Base would be more value than using material in the 3…"

Ryan Zylstra replied Sep 4, 2015 to Pocket Holes: Allowance for material thickness

8 Dec 30, 2015
Reply by Elizabeth Leveques

"Hello, You are correct in your thoughts about the drill guide block stepping back in…"

Ryan Zylstra replied Sep 2, 2015 to Pocket Holes: Allowance for material thickness

8 Dec 30, 2015
Reply by Elizabeth Leveques

"Online, or in store? Do you have a LINK to online?"

Ryan Zylstra replied Jun 19, 2014 to Good Buy

5 Jun 25, 2014
Reply by Charlie Keith

"The micro jig is not required for 1/2 stock but it gives a much cleaner appearance.…"

Ryan Zylstra replied Jun 11, 2014 to K4 for drawers

2 Jun 11, 2014
Reply by Paul Crow

"Tim,   Kreg doesn't sell any of the body only pieces."

Ryan Zylstra replied Jun 6, 2014 to Looking for K3 Master clamp

4 Jun 6, 2014
Reply by Ryan Zylstra

"Hofy, The K3 is no longer available from Kreg. You may find one on Ebay or Craigslis…"

Ryan Zylstra replied Jun 3, 2014 to Looking for K3 Master clamp

4 Jun 6, 2014
Reply by Ryan Zylstra

"Stephen,   you can use the kreg jig to join mfc. be careful though, use coarse screw…"

Ryan Zylstra replied Jun 3, 2014 to Using MFC

5 Jun 4, 2014
Reply by Gary roofner

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Untitled

No Description

Started by Joe in Beginners' Zone on Sunday.

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_