Have you had any problems with there rear hips Harold ? All ours had problems in that area ,some give them a bad reputation for temperament ours always good as gold .
Love the dogs Harold ,I was bought up with alstations, german shepherds ,we even had a white one called rex .Harold you still got that shop door locked ha ,mick.
Hi Harold , the bench was made from yellow pine 5/4 rough cut , planed down to true 1 " board,s and the stain was spanish oak ! Yes it was a lot of work on the band and scroll saw,s and a lot of glue up, s on the wide board,s !! It was worth it , thank,s for your nice comment,s , Jim !
At 9:33pm on December 26, 2013, Kent Kinsala said…
Of course Harold! I have relatives is Dallas, plus I compete in some mountain bikes races around there. Looking forward to cleaning my garage out so I can get back into some wood projects!
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
Harold Caffey's Comments
Comment Wall (9 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Have you had any problems with there rear hips Harold ? All ours had problems in that area ,some give them a bad reputation for temperament ours always good as gold .
Love the dogs Harold ,I was bought up with alstations, german shepherds ,we even had a white one called rex .Harold you still got that shop door locked ha ,mick.
Hi Harold,
Thanks for the invite.
Hope you're having a great time working wood.
Hi Harold ,hows it going you finished your master pieces yet my friend. Mick.
Hi Harold , the bench was made from yellow pine 5/4 rough cut , planed down to true 1 " board,s and the stain was spanish oak ! Yes it was a lot of work on the band and scroll saw,s and a lot of glue up, s on the wide board,s !! It was worth it , thank,s for your nice comment,s , Jim !
Hi Harold hows it going ? That table would take abomb hit or two good and sturdy .
Texas? Could you share some sunshine and warmth? Deep Freeze here in Michigan!
Hi Harold,
Thanks for the friend request. :) Lorrie
Of course Harold! I have relatives is Dallas, plus I compete in some mountain bikes races around there. Looking forward to cleaning my garage out so I can get back into some wood projects!
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Kreg Workbench Weight?
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service