What's one interesting fact about you, your life, your garage, shop, or home?
I have built a 1600 square foot welding/wood working/automotive shop, completely stocked with tools and equipment and it's taken me over 30 years to do so. I am always adding to my tool arsonal, thus adding to my capabilities. My Kregs jig is now one of my favorite tools in my shop. There are so many things I can build that I couldn't before I got it.
Hi Harold , the bench was made from yellow pine 5/4 rough cut , planed down to true 1 " board,s and the stain was spanish oak ! Yes it was a lot of work on the band and scroll saw,s and a lot of glue up, s on the wide board,s !! It was worth it , thank,s for your nice comment,s , Jim !
The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue
I have an old Rip-Cut which I bought many years ago but did not set. I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…