Kreg Owners' Community

If anybody want to be able to drill alot faster using their kreg jig check out these videos showing how to make a simple jig that makes a kreg jig alot faster by making it so you can clamp the material using a simple foot lever attachment. Real easy to make and basically made of scrap wood. https://www.youtube.com/watch?v=3FDQMOgvnrg
https://www.youtube.com/watch?v=Qz7qCk8xphY

Views: 2998

Reply to This

Replies to This Discussion

Not everyone can afford to buy the air stuff Jay. It's a cheap way to speed up these jigs with allmost no cost and You Don't need to have air to run it.
Here is an even better way to make the older style kreg jigs foot clamping. Way easier to make and way more compact.
https://www.youtube.com/watch?v=D90HSJYP1lo
That's the demo
This is the video showing how to make it
https://www.youtube.com/watch?v=Hr0GukX6kwg

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_