I am Mrs. Julie Mewis, an aging widow suffering from long time illness (Esophageal Cancer). I have some important information (charity proposal) for you, May God continue to bless you, Please reply (email@example.com) for more details.
Hi Joseph, I wanted to share this with you as a fellow woodworker, (this is a tremendous opportunity and can save money, and get a free $2,500 vacation) it has software where you can track tax deductions for business expenses and so on...valuable for the trips back and forth to the lumber store or big box stores and materials
I'm helping change one life at a time each day - let today be your day!
save 22% on your cell phone bill save on monthly grocery bill save on things you already buy at stores you already purchase them at Get a $2,500 for FREE Get free stuff Get free magazone subscriptions Get paid to drive your car Get over 450 tax deductions since you own our own business - PRICELESS!!!
Hi joe ,no plans for the totes joe made them up as i went along.Measurements i try to do these in inches were in milimeters here .[totes 10" long x10"highx6" wide the 2 side panels are 5" long the handle three eighth dowel hope this helps joe good luck,regards mick/uk.
Joseph, almost all of the cabinet is of a knotty pine. There is a the sides of the drawer boxes and the very bottom of the cabinet that is not pine. The drawer box sides are of baltic 9 ply 1/2 inch baltic birch and the bottom of the cabinet is a 3/4 inch birch. The pine is what we call "pecky pine" out here getting its name for the small specks of knots found through out the pine. The horse heads are hand painted using a porceline paint that is then baked in an oven and becomes almost a permanet peice of the glass. It was lots of fun building and I built it for a customer as you probably guessed have horses. Thanks for your interest. jay
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…