Kreg Owners' Community

It might have helped that was $20.00 in the drawer...

Views: 103

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by ralph wayne crocker on January 24, 2010 at 10:05pm
I like that alot,,,good job.....
Comment by Kerry Drake on January 3, 2010 at 1:43pm
Thanks so much.
Comment by Kerry Drake on January 2, 2010 at 8:00am
If you go back a couple blog posts you can see the mirror back without the mirror in it.
Comment by Kerry Drake on January 2, 2010 at 7:57am
I actually took a piece of 3/4" birch ply and cut out the entire back shape, then I traced the shape of the mirror onto it, and used a router to route out a 1/4" deep recess the shape of the mirror. I then used plain old liquid nails to fasten the mirror into the hole (after everthing was stained). We used some sea grass and hot glue to trim around the mirror as a final step to hide any little imperfections (and there were a lot of them) in the routed out hole.

Hope this makes sense. If not let me know.
Comment by Don Grubish on December 30, 2009 at 8:57pm
Twenty whole dollars? COOL!!

Seriously, though, the vanity desk turned out excellent! Giving away woodworking projects you made yourself is 100x better than going shopping at a store. They will always remember and keep a woodworking project.
Comment by Joe Luberto on December 30, 2009 at 8:48pm
Good job as always kerry.It's nice to see that you made this girls Christmas.
Comment by KregRep on December 30, 2009 at 4:08pm
She certainly looks pleased! What a rewarding finish to such an exciting project! Great job, Kerry... and thanks for taking us all along for the ride.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Wall cabinet 14-16" deep

I'm looking for plans, especially the cutout pieces on a 4' x 8' sheet of plywood for wall cabinets that are deeper than the standard 12". Anyone in the community adapted Kreg plans for 12" to a deeper cabinet?Thanks, HenryContinue

Tags: cabinets, Wall

Started by Henry Beun in Kreg Jig® Projects Jul 25.

Joining 1.5" thick red oak butcher block

Hello. I am a beginner DIYer and new to this community. I am searching the best way for joining 1.5 inch thick Red Oak butcher block counter top. I need to join 2 boards perpendicular for L shape. Would 1 1/2 fine thread screws with 1 1/2  jig setup…Continue

Started by Aya Kaiho in Beginners' Zone Jul 17.

Product Reviews

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_